Nano Hone Stones, Set
Set consist of sharpening stones with grits 400 (No. 711226), 1000 (No. 711227), 6000 (No. 711228) and the Nano Hone Stone Holder light (No. 711569).
These premium stones from the American manufacturer Nano Hone are produced in Japan. The sharpening particles are of high purity and homogeneity. This is noticeable in the transition to finer grains, with the grinding marks of the previous grit being quickly removed. A special bond enables fast grinding with a flat surface. The stone has an aluminium base plate and is therefore 100 % distortion-free. Conventional sharpening stones warp in the micro range due to the absorption of water. The extremely flat aluminium base of the Nano Hone stones solves this problem. Another advantage of the aluminium base is the good legibility of the grain, which remains visible even after prolonged use. In addition, the different grain sizes can be recognised even more quickly by the different base colours. Two bores in the aluminium base allow quick and easy mounting on the Nano Hone stone holder (No. 711219). The stones should be sprayed with water before use. Permanent storage in water is not recommended. White aluminium oxide abrasive.
Nano Hone
Nano Hone is an entity of HMS Enterprises Inc., which is headquartered in the USA and has a production site in Japan. Nano Hone has over 40 years experience in the field of sharpening, dressing and woodworking, and is dedicated to developing outstanding, innovative and high-quality sharpening products.
- Grit 400, 1000, 6000
- Dimensions 210 x 75 x 15
- Base Aluminium base plate
- Purity of the grain very high
- Recommended steels High-alloy tool steels
- Abrasive Corundum
- Abrasive surface size 210 x 75 mm
- Abrasive layer thickness 12 mm
- Grade of wear low
- Bond type ceramic
- For tool type Knives and tools
- Use Sharpening stone set with multiple grits
| Article no. | 711229 |
| Brand | Nano Hone |
Set consists of the following articles:
Replacement parts
Nano Hone Shaping Stone, Grit 400 (35 microns)
The hard bond is preferable for high-alloy tool steels. Coarse-grained alloy constituents (e.g. chromium and vanadium) in tool steels require a stone that wears slowly.
€73.90
Nano Hone Sharpening Stone, Grit 1000 (15 microns)
The hard bond is preferable for high-alloy tool steels. Coarse-grained alloy constituents (e.g. chromium and vanadium) in tool steels require a stone that wears slowly.
€79.90
Nano Hone Honing Stone, Grit 6000 (2 microns)
The hard bond is preferable for high-alloy tool steels. Coarse-grained alloy constituents (e.g. chromium and vanadium) in tool steels require a stone that wears slowly.
€98.90