Twisted Splitting Wedge with Tip

Twisted Splitting Wedge with Tip
In former times, axes were used to cut down trees, but nowadays these have been replaced by chain...
Because of its twisted shape, the wedge angle enlarges while the wedge is being knocked in. This results in higher splitting forces. The tip is easily applied to the wood and forces itself in. Grooves on the side of the wedge bite into the wood and therefore prevent the wedge from recoiling.
In former times, axes were used to cut down trees, but nowadays these have been replaced by chain saws. This rapid development also affected splitting wedges. The oldest models, usually made of wood, have been replaced by low-wear splitting wedges made of steel. Now engineering has taken another step: safety splitting wedges are made of extremely impact-resistant, forged aluminium. They do not splinter and are no risk for chain saws. At the same time they are very light and protected against corrosion.
     
    more
    less
    • Width 50 mm
    • Length 230 mm
    • Weight 900 g
    Article no. 706079
    Brand -
    Ready to ship today, delivery time 2-3 workdays within Germany
    €52.40 per piece(s)

    Prices incl. VAT

    i

    plus shipping costs

    Remember
    Many other models
    Type Price Quantity
    Twisted Splitting Wedge with Tip
    Twisted Splitting Wedge with Tip

    Because of its twisted shape, the wedge angle enlarges while the wedge is being knocked in. This results in higher splitting forces. The tip is...

    Article number 706079
      €52.40
     
    Felling and Splitting Wedge
    Felling and Splitting Wedge

    An extra-long wedge to fell trees and split large blocks of wood. The scaled surface prevents the wedge from recoiling. Lift height 35 mm.

    Article number 706074
      €42.00